Canon SELPHY CP900 User Manual

Contents

Canon SELPHY CP900 User Manual Manual pdf 54 page image

54Handling SELPHYO Do not apply strong force or vibration. This may cause paper jams or the printer to malfunction.O Do not expose SELPHY to insect sprays and volatile liquids. Do not allow SELPHY to be in contact withrubber or plastic products over a long time. This may deteriorate the external casing.O Depending on the room temperature, SELPHY may overheat and temporarily stop operating. This is nota malfunction. Wait for a while untill SELPHY cools down and restarts operating. Printing may take longerwhen continuously printing, the room temperature is high, or SELPHY’s rear air vent (p. 6) is blockedbecause SELPHY will temporarily stop printing due to overheating.O When moving SELPHY from a cold place to a warm place, insert SELPHY in an airtight plastic bagin advance and remove after SELPHY has reached room temperature to avoid condensation. Ifcondensation forms, leave SELPHY in room temperature until the condensation evaporates naturally.O Clean SELPHY with a soft dry cloth.O If dust accumulates on the air vent (p. 6), remove the ink cassette (p. 14) and clean away the dust. Theprinting results may not be clean if dust gets in from the air vent.O Never clean SELPHY with solvents such as benzine or thinner, or mild detergent. This maydeteriorate or deform the external casing, or the coating may peel off.FCC Notice(Printer, Models CD1100 and CD1107 Systems)This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.The cable with the ferrite core provided with the printer must be used with this equipment in order to comply withClass B limits in Subpart B of Part 15 of the FCC rules.Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If suchchanges or modifications should be made, you could be required to stop operation of the equipment.Canon U.S.A., Inc.One Canon Plaza, Lake Success, NY 11042, U.S.A.Tel No. (516) 328-5600Canadian Radio Interference RegulationsThis Class B digital apparatus complies with Canadian ICES-003.COPY

/ 56

Related manuals for Canon 5959B001