Canon SELPHY ES2 User Manual

Also see for 2096B001 - SELPHY ES2 Photo Printer: Software guide Software guide Beginner's guide

Contents

Canon SELPHY ES2 User Manual Manual pdf 79 page image

Making Printer Settings79AppendixPrinter Setup MenuThe default setting is marked as .Bluetooth SettingsItem Description SettingsAuto Rotate By setting the camera, the image can be automaticallyrotated on the LCD monitor.On , OffAuto PowerDownThe printer automatically turns off if no operation isperformed for five minutes.On , OffBluetooth Sets the model name and/or security details when usingBluetooth. [Bluetooth] is displayed only when a Bluetoothunit (sold separately) is connected.Refer to p. 79Language Sets the display language of the LCD monitor. Refer to p. 81Transition Sets the transition effects when you switch the image. Fade, Wipe,OffReset All Reset the printer's settings to their defaults. –Device name Selects a name from Canon ES2-1 ( ) to ES2-9 (ES20-1 to ES20-9).This is the name used when the target device (this printer) is selectedfrom the mobile phone. This setting distinguishes this device whenthere are two or more Bluetooth-enabled devices capable ofcommunication.Security Selects either [On] or [Off] ( ). When set to [On], the passkey for theprinter and mobile phone must be entered when connecting to theprinter.Passkey The passkey refers to an identification number to be determined. It isused to prevent incorrect access from other Bluetooth devices. When[Security] is set to [On], press and set the key (4-digitnumber) to enter on the mobile phone to enable printing. The defaultpasskey is "0000".Deny Access Selects either [On] or [Off] ( ). Selecting [On] will disable searchingand printing from Bluetooth devices.Reset Reset Bluetooth settings to their defaults.