72PROJECTING AN IMAGE FROM AV EQUIPMENTSelecting Aspect Ratio of the Projecting Image(Screen aspect)You can select among three aspect ratios of the projecting image according to the aspectratio of the projected screen.You can project an image on the whole screen by setting [Screen aspect].z You can set [Screen aspect] from menu. Refer to the section [Screen aspect] on themenu for details (P99). 4:3Select this when you use a screen with aspect ratio of 4:3.The following table shows the available [Aspect] mode for each input signal. 16:9Select this when you use a screen with aspect ratio of 16:9.Select [4:3] from the [Aspect] menu if you want to project a video image with aspect ratio of4:3 in this mode (P71).The following table shows the available [Aspect] mode for each input signal.Input signal Available [Aspect] modeVIDEOS-VIDEOSCARTFull screenWideCOMPONENTDIGITAL VIDEOFull screenAutoWideInput signal Available [Aspect] modeVIDEOS-VIDEOSCART4:3WideCOMPONENT(480i/575i/480p/575p)DIGITAL VIDEO(480p/575p)4:3WideCOMPONENTDIGITAL VIDEO(720p/1035i/1080i)Widez [Auto screen color] may not correct the screen color properly. If such is the case, correct itmanually. (P96)
