Canon Selphy Square QX10 Getting Started

Also see for SELPHY SQUARE QX10: Getting started Getting started

5Lamp indicationsSTATUS lamp CHARGE lamp StatusOff Off Power off (Not charged)Blinks slowlygreenCharging in progress (Power off)Lights green Charging complete (Power off)*1Blinks slowlywhiteOff Printer start-up in progressBlinks white Off Processing...Blinks quicklywhiteOff Remove the printed paper.Lights white Off Standing by to print (Not charged)*2Blinks green Standing by to print (Battery level low)Blinks slowlygreenStanding by to print (Charging in progress)Lights green Standing by to print (Charging complete)Blinks slowly red Blinks slowlygreenOutside the operating temperature range socharging has paused.Blinks red Off An error occurred. Check the app message.Blinks green The battery level is low so printing is notpossible. Charge the battery.Blinks quickly red Off An error occurred. Turn the power off andthen on again.Blinks quicklygreenA battery error occurred.*1 After a while, the CHARGE lamp turns off.*2 You can check the battery level by pressing the Power button in the Standing by toprint (Not charged) status.• CHARGE lamp blinks two times:The battery level is low, but the printer can still be used.• CHARGE lamp blinks three times:The battery level is sufficient.