Canon Speedlite 270EX II Instruction Manual

Also see for SPEEDLITE 270EX II: Brochure Instruction manual

0 • Be sure to use a new setoftwo batteriesofthe same brand. When replacing thebatteries, replace both batteries at once.~Do not fire more than 20 continuous flashesina short time.If you fire more than 20 continuous flashesina short time, the overheating preventionfunction may be activated and make the recycling time about 8 to 20 sec. If this occurs,allow a rest time of about 15 min. and the functioningofthe flash will then return tonormal.•Ifyou change the batteries after firing flashes continuously, be aware that the batteriesmight be hot.• Using size-AA/LR6 batteries other than the alkaline type may cause improper batterycontact due to the irregular shapeofthe battery contacts.[lJSize-AAILR6 Ni-MH or lithium batteries can also be used.6Attaching the FlashBe sure to turn off the Speed lite before attaching or detachingit.12Slide the lock lever to the left andattach the Speedlite to the camera.• Slip the Speedlite's mounting foot firmly all the wayinto the camera's hot shoe.Secure the Speedlite.• Slide the lock lever to the right.•Toremove the Speedlite, slide the lock lever to theleft and detach it from the camera.7