54Wireless SettingsDuring radio transmission wireless shooting, the master unit’s LCDpanel illuminates or turns off according to the charge status of themaster unit and slave units (firing groups). The master unit’s LCD panelilluminates if the master unit and slave units are not fully charged. Whenthe master unit and slave units are fully charged, the LCD panelillumination will turn off after approx. 12 sec. As the charge for themaster unit and slave units becomes insufficient when you take apicture, the master unit’s LCD panel will be illuminated again.You can save the wireless settings to the master unit and slave unit,and recall the settings later. Operate the master unit or slave unitseparately depending on which unit’s settings are to be saved orrecalled.1 Select <L>.Press the <1> button.Turn <9> to select <L>, thenpress <8>.2 Save or load the settings.Turn <9> to select <V> (save)or <J> (load), then press <8>.Select <;>.X The settings are saved (stored in thememory) or the settings that weresaved are set.LCD Panel IlluminationMemory FunctionIf any of the master unit or slave unit (firing group) is not fully charged,<G> will be displayed on the master unit’s LCD panel. Make sure totake the picture after checking either the <G> icon is not displayed onthe LCD panel or the LCD panel is not illuminated.
