Canon Speedlite Transmitter ST-E2 Instructions Manual

Also see for Speedlite Transmitter ST-E2: Manual Instruction manual

Contents

2. Readying the ST-E2(I) Installing the BatteryUse one lithium 2CR5 battery(sold separately).1 Slide the battery compartmentcover as shown by the arrowand remove.Install the battery in the orien -tation shown in the compart -ment.Install the battery compart -ment cover to close the batterycompartment.About the batteryIf t h e b a t t e r y contacts a r esoiled, improper electrical con -t a c t may r e s u l t . Beforeinstalling the battery, wipe thebattery contacts with a cleancloth.When to replace the batteryReplace the battery if it takes 30sec. or longer for t h e red pilotlamp to light after you set t h emain switch to < I > or < HOLD >.(2) Attachment to theCameraPush in the ST-E2's mounting1 foot all the way into the camer -a's hot shoe.Slide t h e shoe lock slider a sshown by the arrow. (The lockpin protrudes to lock t h e ST -E2 onto the camera.)To remove the ST-152, slide theshoe lock slider in the oppositedirection (the lock pin retracts)and slide off the ST- EP.COPY