Intelligent Function Setting Tool1015 Admin ToolsSetting Intelligent Function DetectionSettings Setting Detection Criteria ([DetectionCriteria] tab)Set detection criteria while operating the camera andchecking the video in the video display area. (1) [Detection Settings Name]You can use up to 64 characters in a detection settingname. Be sure to enter a single-byte alphanumericdetection setting name.In a [Detection Settings Name], ASCII characters(spaces or printable characters) can be used.(2) [Area Shape]Select [Rectangular] or [Polygonal] for the shape ofdetection areas you want to set in the video displayarea.For details on detection area setting operations, see“Setting Detection Areas” (p. 102).[Quick setting]The detection area is drawn automatically when thedetection criteria is [Removed Object Detection].[Clear]If the [Area Shape] is [Polygonal], the detection areaset in the video display area is deleted.(3) [Display Color]Choose the color of the detection setting. The colorselected here becomes the display color of thedetection area/line in the video display area.(4) [Object Size (%)] [Change Ratio (%)] [Duration (Sec)]Set the lower limit for the size, change ratio, andjudgment time for the set detection area to triggerdetection. If the value set here is exceeded, “Detected”mode is triggered.Click the text box to enter a value directly, or specify avalue using the slider.For details on the setting method, see “SettingDetection Criteria per Detection Type” (p. 103).(5) [Clear detection line]Clears the detection line set in the video display area.(6) [Passing Direction]Select the passing direction of a moving objectrelative to the detection line.(7) [Decision Point]Select the point of a moving object that will be used ascriteria for passing detection when a moving objectcrosses a detection line.(1)(3)(4)(2)[Detection Criteria] tab(1)(3)(6)(7)(5)(4)Passing detectionMoving object detection, abandoned objectdetection, camera tampering detectionRemoved object detection(1)(3)(4)(2)Video Display AreaDetection Area