Canon VB-S30D Operation Manual

Also see for VB-S30D MKII: Specifications Operating guide Installation guide Installation guide

Contents

54Video Record Setting(1) [Video Record Action]Select the destination of a video recorded when anevent occurs. To record to a server selected on the[Upload] in the setting page, select [Upload] and torecord to a memory card inserted in the camera,select [Record to Memory Card].NoteThe size and format of video recorded according to the [VideoRecord Action] settings are as follows:Settings must be made in the above setting page to makean actual video recording.Volume Detection(1) [Volume Detection Event]Set volume detection to [Disable] or [Enable].(2) [Detect Criteria]Set the criteria for generating volume detection eventsto [The reference volume level or above] or [Thereference volume level or below].(3) [Reference Volume Level]Set the reference volume level for detection in therange of 0 to 100.Perform an actual test at the volume level beforesetting the value.(4) [Detect Criteria Duration (sec)]Set the duration of the detect criteria in the range of 0to 10 (sec.). When the status meeting the detectcriteria has continued for the duration or longer, anON event is generated.(5) [ON Event Operation]Select the operation to be performed upon an ONevent. If [Enable] is selected, (7) [Preset], (8) [VideoRecord] and (9) [E-mail Notification] will be executedaccording to their settings upon an ON event.(6) [OFF Event Operation]Select the operation to be performed upon an OFFevent. If [Enable] is selected, (7) [Preset], (8) [VideoRecord] and (9) [E-mail Notification] will be executedaccording to their settings upon an OFF event.(7) [Preset]If a preset is specified, the camera will orientautomatically to the specified preset position when avolume detection event occurs. To use presets, it isnecessary to set the presets with the Preset SettingTool under Admin Tools (p. 88). If there is no need foradditional camera operation, select [None].[Event]Setting Video Record, Volume Detection, External Device Output/Input andTimerThe following can be set here.• Video Record SettingSet where video is recorded when an eventoccurs.• Volume DetectionSet the operation to be performed at the time ofvolume detection.• External Device OutputSet external device output.• External Device InputSet the operation to be performed when an eventis triggered by input from an external device.• TimerSet timer events.[Video RecordAction] settings Applied video format Applied video size[Upload] [Upload] > [VideoFormat] settingsWhen the video format is[JPEG], [Video] > [JPEG] >[Video Size: Upload /Memory card]When the video format is[H.264(1)], [Video] >[H.264(1)] > [Video Size][Record toMemory Card][Memory Card] >[Video Format]settings