Canon VC-C3 Instruction Manual
Also see for VC-C3: Pin assigments guideUser guide
                                    | |
Contents
| 
NomenclatureVC-C310Before You Use the VC-C3RS232C terminalS VIDEO out terminalVIDEO out terminalAUDIO2 out terminalAUDIO1 out terminalCamera head LEDZoom buttonCamera headBaseCameraDIP switchesAll normally set to OFF.Camera Control UnitCamera control unit LEDINPUT terminalOUTPUT terminalCAMERA terminalMain power switchINPUT terminalCAMERA CABLEterminalID selectorPower switchBase LEDLensWirelesscontroller sensorMicrophoneExtension button*1Used when the VC-C3 isconnected to a computer, etc.Not used in normal use.*1 When the extension button is pressed, the VC-C3 transmits a signalto the computer. This means that some software can attach thecamera detection function to the extension button.If the settings are changed, switchthe VC-C3 OFF and ON again.These switches should be set whenyou connect the VC-C3 to thecomputer (consult your authorizedCanon dealer). ( P.35)SW1SW2SW3SW4Normally set to OFF. If you wantto control the VC-C3 using thecommands for the earlier VC-C1model and the commands do notwork when SW3 is set to ON, setSW1 to ON also.Normally set to OFF. Set thisswitch to ON if you want tocontrol the VC-C3 using thecommands for the earlier VC-C1model.Reserved (always OFF) |
Related manuals for Canon VC-C3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine