Canon VC-C3 Instruction Manual

Also see for VC-C3: Pin assigments guide User guide

Canon VC-C3 Instruction Manual Manual pdf 25 page image

Multiple VC-C3s can be operated separately by assigning an ID number to each VC-C3 and then specifying the desired ID number from the wireless controller.If you install multiple VC-C3s in one location, all the VC-C3s will respond to thecommands from the wireless controller. In this situation, the ID mode function isextremely useful as it permits the VC-C3s to be individually controlled.PreparationsSet the ID numbers for each VC-C3.Use a small flat-head screwdriver to set anID number (from 1 to 6) through the IDselector on the rear panel of the base.n Set the ID numbers for each VC-C3s installed inthe location.n You can assign the same ID number to multipleVC-C3s. In this way, the VC-C3s with the same IDperform the same operation.n The numbers on the ID selector go up to 9, butonly numbers 1 to 6 are valid as ID numbers. Ifyou set the ID to 0 or 7 through 9, the VC-C3 willrespond to any wireless controller command andcannot be controlled individually.25ID ModeID selector(Default setting)