Canon VIXIA HF G30 Manual

Also see for VIXIA HF G30: Instruction manual Quick guide Connection guide Connection guide Manual

Contents

Canon VIXIA HF G30 Manual Manual pdf 10 page image

Transferring Files to a Computer or FTP Server10Transferring Files to a Computer or FTP ServerYou can wirelessly transfer files (recordings) directly to a computer or an FTP server. You will need acorrectly configured FTP server. During the manual setup procedure, you will need to enter the FTPserver's IP address, port, user name, password and file transfer destination (where the files will betransferred to).1 Camcorder: Open the desired movie index screen.2 Open the [FTP Transfer] screen.[MENU] > s > [Wi-Fi] > [FTP Transfer]3 Enter the FTP server's IP address for [FTP Server] and the port number for [Port].4 Touch [Next].5 Enter the user name and password and then touch [Next].6 Enter [/] for [Destination Folder] and then touch [OK].• Depending on the FTP server's settings, the required text for the port number and destinationfolder may differ. Check the settings on your FTP server.• The camcorder will connect to the access point selected in Wi-Fi Connection Using an AccessPoint (A 11).7 When [Save the access point] appears on the screen, touch [OK] and then perform theprocedure in Wi-Fi Connection Using an Access Point (A 11).• For details about this function, refer to Transferring Files to a Computer or FTP Server in thecamcorder's Instruction Manual (PDF file).IMPORTANT• Observe the following precautions when transferring files. Failing to do so may interrupt the transferand incomplete files may remain at the transfer destination.- Do not open the double memory card slot cover.- Do not disconnect the power source or turn off the camcorder.• If the file transfer is interrupted, select [New files] and perform the file transfer again.• If incomplete files remain at the transfer destination, check the content and make sure they are safeto delete before deleting them.Operating modes:Access point ComputerCOPY