Playback on a Computer92 Camcorder: Open the [Movie Uploader] screen.[MENU] > s > [Wi-Fi] > [Movie Uploader]• The camcorder’s SSID (network name) will appear.• The camcorder will be ready to connect with the iOS device.• To set or change the camcorder's password, perform the procedure in Setting the Camcorder'sPassword (A 6) starting from step 2.3 iOS device: Activate Wi-Fi in the settings screen.• The network names of detected access points will appear.4 iOS device: Touch the access point with the same SSID displayed in step 2.• If you have performed this procedure before and you have not changed the camcorder'spassword, the connection will be established automatically.5 iOS device: Enter the camcorder's password set previously.• [Connected] will appear on the camcorder’s screen and the connection will be established.6 iOS device: Use the Movie Uploader app to upload the camcorder’s movies (and photos, ifapplicable).• For details about the Movie Uploader app, visit PIXELA’s Web site.http://www.pixela.co.jp/oem/canon/e/movieuploader/ (English only)• For details about this function, refer to Uploading Recordings Using an iOS Device in thecamcorder's Instruction Manual (PDF file).NOTES• The following types of MP4 scenes will be recognized as multiple files on other devices.- Scenes exceeding 4 GB- Scenes recorded at 35 Mbps exceeding 30 minutes- Scenes recorded with a recording mode other than 35 Mbps exceeding 1 hourPlayback on a ComputerUsing the Media Server function, you can wirelessly view your movies and photos from your computeror similar device. You will need an access point connected to your home network and softwareinstalled on your computer that can play back movies and photos on the media server. Werecommend that you connect the computer to the access point using a LAN cable. Refer also to theinstruction manuals for the computer, software and access point.• For details about this function, refer to Playback on a Computer in the camcorder's InstructionManual (PDF file).Access pointLAN cableComputerCOPY