100 PhotosPrinting PhotosPrinting Photos (Direct Print)The camcorder can be connected to any PictBridge-compatibleprinter. You can mark in advance the photos you want to print and setthe desired number of copies as a print order ( 103).Canon printers: SELPHY printers of the CP, DS and ES series and PIXMAprinters marked with the PictBridge logo.Connecting the Camcorder to the Printer1 Set the camcorder to mode, single photo view./ You can select the photos in the built-in memory or on thememory card. Afterwards, move the zoom lever toward T to return tosingle photo view.2 Turn on the printer.3 Connect the camcorder to the printer using the supplied USBcable.• Connection . Refer toConnection Diagrams ( 109).• If the device selection screen appears, select [Computer/Printer] andpress .• appears and changes to .IMPORTANT• If continues to flash (for more than 1 minute) or if does notappear, the camcorder is not correctly connected to the printer. In suchcase, disconnect the USB cable and turn off the camcorder and theprinter. After a short while, turn them on again, set the camcorder tomode and restore the connection.• During the following operations, even if you connect a printer to thecamcorder it will not be recognized.- Deleting all photosOperating modes:4COPY
