48 AUTO ModeIMPORTANT• To protect the lens, keep the lens cover closed when you are notrecording movies and when you are not using the camcorder.• Observe the following precautions while the ACCESS indicator is on orflashing. Failing to do so may result in permanent data loss or damageto the memory.- Do not open the memory card slot cover.- Do not disconnect the power source or turn off the camcorder.- Do not change the camcorder’s operating mode.• Be sure to save your recordings regularly (A 128), especially aftermaking important recordings. Canon shall not be liable for any loss orcorruption of data.• Recordings on an Eye-Fi card will be uploaded automatically after set-ting the camcorder to playback mode, if you are within the range of aconfigured network. Always verify that Eye-Fi cards have beenapproved in the country/region of use. See also Using an Eye-Fi card(A 146).NOTES• About the power saving mode: If q > [Power Saving Mode] > [AutoPower Off] is set to [i On], the camcorder will shut off automaticallyto save power when it is powered by a battery pack and is left withoutany operation for 5 minutes. Press P to turn on the camcorder.Intelligent ISIntelligent IS allows the camcorder to select the best image stabilization optionbased on your shooting method. The Intelligent IS icon will change to one of thefollowing icons. In and modes, you can set the image stabilizationmanually (A 97).* You can turn off Powered IS through the [ Main Functions] panel (A 98).Shooting method IconMost general situations; Zooming out (zooming towardT); Following subjects at a distance moving left or right Ä (Dynamic IS)Zooming in (zooming toward S) È (Powered IS)*Close-up of a subject (Macro IS)Remaining stationary, such as when using a tripod (Tripod mode)
