76 Advanced Shooting• During exposure lock, y and the exposure compensation value willappear on the screen.Touch AE2 Touch a subject that appears inside the y frame.• The Touch AE mark (I) will flash and the exposure will be optimizedautomatically for the subject you selected.• Touch [n] to return the camcorder to automatic exposure.3 Touch [X] to apply the selected shooting mode and adjustedexposure.• Using Touch AE also locks the exposure (the exposurecompensation dial appears with the compensation value set at ±0).Before touching [X], you can compensate the exposure further(steps 3 and 4 in the previous procedure).• During exposure lock, y and the exposure compensation value willappear on the screen.NOTES• If the shooting mode is changed during exposure lock, the camcorderwill return to automatic exposure.• By default, the camcorder corrects for backlight conditions. You canturn off the automatic correction with the 1 > p > [Auto Back-light Correction] setting.Adjusting the FocusAutofocus may not work well on the following subjects. In such case,focus manually.Operating modes:• Reflective surfaces• Subjects with low contrastor without vertical lines• Fast moving subjects• Through wet windows• Night scenesSCNCOPY
