Canon VIXIA HF200 Instruction Manual

Also see for VIXIA HF20: Software guide Instruction manual Instruction manual Instruction manual Specifications

Contents

Canon VIXIA HF200 Instruction Manual Manual pdf 152 page image

Thecamcorderis connectedusing the optional HTC-IO0HDMI Cable, but there is no picture orsound from the HDrM.- Disconnectthe HTC-IO0HBMI Cableand then restore the connection or turn the camcorderoff and then on again.The camcorder is connected using the optional HTC-lOO HDMICable, but HDMI-CECdoes notwork (cannot play back using the TV's remote control).- Disconnectthe HTC-IO0 HBMI cable and turn off the camcorder and the TV.After a shortwhile turn them on againand restorethe connection.- I_/ 0 [Controlfor HBMI] isset to [Off]. Set it to [On] (_ 144).- HDMI-CECis not activated on the connectedTV.Activate this function on the TV.- Evenwith TVsets compatible with HDMI-CECthe range of functions available differs depend-ing on the type of TV.Referto the instructionmanualof the connectedTV.The computer doesn't recognize the camcorder even though the camcorder is connectedcorrectly.- _ or _ 0 [USBConnectionType] is set to [DVBBurner[. Set itto [Computer/Printer]orto [Connectand Set](_ 140).- Disconnectthe USB cable and turn off the camcorder.After a short while, turn it on again andrestore the connection.- Connect the camcorder to a different USBport on the computer.The printer is not working even though the camcorder and printer are connected correctly.- _ or _--_ 0 [UBBConnectionType] is set to [DVBBurner[. Bet itto [Computer/Printer]orto [Connectand Set](_ 140).- Disconnectthe USBcable and turn off the printer.After a short while turn it on again andrestore the connection.Thecamcorderdoesn't recognize the DW-IO0 DVDBurner even thoughit is connectedcorrectly.- _ or _ 0 [UBBConnectionType] is set to [Computer/Printer].Bet it to [DVDBurner[orto [Connectand Set](_ 140).List of Messages(inalphabeticalorder)Following the list of messages for the camcorder you can find separatelists for print-related messages (_ 159) and for messages that appearonly when using the optional DW-IO0 DVD Burner (_ 158).Accesserror- There was an error when reading the memoryor attempting to write onto it.- This message can also appearif condensation hasformed (E_I 167). Wait until the cam-corder dries completely before resuming use.152 * Additional information