Getting StartedPreparations21IMPORTANT Make sure to initialize all memory cardsbefore using them with this camcorder for thefirst time ( 66). Memory cards have front and back sides thatare not interchangeable. Inserting a memorycard facing the wrong direction can cause amalfunction of the camcorder.NOTESProper operation cannot be guaranteed for allminiSD cards.Preparing the Camcorder1 Turn on the camcorder.The lens cover will open automatically.2 Adjust the viewfinder.Keep the LCD panel closed to use theviewfinder and adjust the dioptricadjustment lever as necessary.3 Fasten the grip belt.Adjust the grip belt so that you canreach the zoom lever with your indexfinger, and the START/STOP buttonwith your thumb.The Wireless ControllerInserting the Battery(Lithium Button Battery CR2025)1 Press the tab in the direction of thearrow and pull out the batteryholder.2 Place the lithium button battery withthe + side facing up.3 Insert the battery holder.Using the Wireless ControllerPoint the controller at the camcorder’sremote sensor when you press thebuttons.NOTES The wireless controller may not work properlywhen the remote sensor is situated understrong light sources or direct sunlight. If the wireless controller does not work, checkthat [WL.REMOTE] is not set to [OFF ]( 44). Otherwise, replace the battery.TabCOPY
