Menu Options ListsAdvanced Functions43Display Setup (LCD Brightness, Language, etc.)DISPLAY SETUPAdjust ( ) the brightness of the LCDdisplay with the joystick. Changing the brightness of the LCDdisplay does not affect that of theviewfinder or the recordings.[ OFF], [ LEVEL(WHT)],[ LEVEL(GRY)], [ GRID(WHT)],[ GRID(GRY)]You can display a grid or a horizontal lineat the center of the screen. The markersare available in white or gray. Use themarkers as a reference to make sure yoursubject is framed correctly (vertically and/or horizontally). Using the markers will not affect therecordings on the tape or memory card.[ OFF], [ ZEBRA(70%)],[ ZEBRA(100%)], [ PEAKING]You can use the assist functions to makesure you adjust the focus and exposurecorrectly.[ZEBRA]: A striped pattern (zebrapattern) will appear over areas of thepicture that are overexposed (too bright).[ ZEBRA(70%)] is more sensitivethan [ ZEBRA(100%)].[ PEAKING]: The silhouettes ofobjects in the picture will be emphasizedin order to allow you to focus manuallymore easily. Using the assist functions will not affectthe recordings on the tape or memory card.[ ON], [ OFF][ ON]*, [ OFF]When set to [ ON], the camcorder’son-screen displays will appear also on thescreen of a connected TV or monitor. You can also use on the wirelesscontroller. When the the data code is displayed onthe camcorder’s screen, the sameinformation will also appear on aconnected TV regardless of the [TVSCREEN] setting. Turn off the data codedisplay by repeatedly pressing .* The default value is [ OFF] in theplayback modes.[ ON], [ OFF]When you start playing back a tape orwhen the date of the recording changes,the date and time will be displayed for 6seconds.[ DATE], [ TIME], [ DATE & TIME],[ CAMERA DATA]BRIGHTNESSMARKERSASSIST FUNC.AUDIO LEVEL ( 61)TV SCREEN6SEC.DATEDATA CODE ( 57)DISP.DISP.COPY
