Video 109Using HeadphonesUse headphones for playback or to check the audio level while record-ing. The headphones are connected to the AV OUT/X terminal, whichis used for both the headphones and the audio/video output. Beforeconnecting the headphones, follow the procedure below to change thefunction of the terminal from AV output to X (headphones) output.* Headphones can be used also in mode but the function of the terminal can-not be changed in this mode. Change the setting in advance in one of the otheroperating modes.1 Change the function of the terminal to headphones output.* Only when performing the procedure in a recording mode.2 Connect the headphones to the AV OUT/X terminal.3 Adjust the volume as necessary.** You can also drag your finger along the [Headphones] bar.• J will appear on the screen.To adjust the volume during playbackIn mode, and in mode during slideshow playback, adjustthe headphones volume the same way you adjust the speaker’s vol-ume (0 57).Operating modes: *[FUNC.]* 8 [MENU] 8 6 8 [AV/Headphones] 8[Headphones] 8 [f][Volume] 8 [c] or [d]** to adjust the volume 8 [a]COPY
