Video 99NOTES• If the recording program is changed during exposure lock, the cam-corder will return to automatic exposure.• When shooting subjects with a strong light source behind them, thecamcorder automatically corrects for the backlight*. You can turn off theautomatic backlight correction with the 7 8 [Auto Backlight Cor-rection] setting.* Except in mode when using a cinema-look filter other than [Cinema Stan-dard].Automatic Gain Control (AGC) LimitWhen recording in dark surroundings, the camcorder will automaticallyincrease the gain to try to get a brighter picture. However, using highergain values may result in more noticeable video noise. You can selectthe AGC limit to curb the amount of noise by setting the maximum gainvalue to be used. The smaller the AGC limit, the picture will be darkerbut will have less the noise.* Touch [z Automatic] to remove the limit for the automatic gain control.** You can also drag your finger along the dial.• The selected AGC limit will appear on the screen.Manual Focus AdjustmentAutofocus may not work well on the following subjects. In such case,focus manually.Operating modes:[FUNC.] 8 [P AGC Limit] 8 [y Manual]* 8[y] or [A]** to set the AGC limit 8 [a]• Reflective surfaces• Subjects with low contrastor without vertical lines• Fast moving subjects• Through wet windows• Night scenesCOPY
