4 Setup & OperationI. Modesi. The camcorder has two modes of operation. One is called Dual Shot(allows photos) and the other is Movie Mode.ii. Use the mode switch (item 14 on page 2) to switch between modes ortouch the icons on the screen: Movie: Photo:If you are in Dual Shot mode, the camcorder operates with automatic focus,aperture, exposure, mic level, and Image Stabilization. This mode also allows 8MPstill images to be captured.By default, most of these settings are ON in Movie mode as well. To changeany of these settings, touch [FUNC] on the touch screen, and then select thefunction you want to adjust.The touch screen works much like an iPhone, and allows gestures like slidingup, down, and sideways to scroll through menu items. You can also use the touchscreen to control zoom, or to track a subject for focus.Lets set the camera to Movie Mode.II. Menu NavigationThere are really two menus: one controls general settings (press Playbutton (item 3, pg.2), then [MENU]), and one is for Camera Functions (touch[FUNC], then [MENU]). These menus are very intuitive and after a few minutesscrolling through them, you’ll find all available adjustment parameters for thiscamcorder.i. To get to the menu, press the playback button (item 3 on page 2),then select [MENU].ii. To exit any menu, touch [X] and you’ll be back ready to shoot. Exitingthe menu also saves any changes you made to the settings.Note: You must set the camera to M (Movie Mode) to access these functions;slide the switch to M (item 14 on pg.2).On the touch screen there’s an icon of a photo camera. Ifyou touch this, the camera will change to photo mode, disabling videorecording. If this happens, just touch the icon of the moviecamera to get back to video mode.