Setting Up the Printer1-6ImportantAssembling the StandThe printer unit and stand set are packaged disassembled. For the W7200, orwhen the stand is to be used with the W7250, the stand must be assembledfirst. One hex driver is packed with the printer unit and another is providedwith the stand.If the W7250 is to be placed on a table, go to “Setting Up the Printer”.(Æ P.1-9)z Save the box and all packing material. You will need them again to pack the standfor moving or shipping if the printer and stand are moved to another location in thefuture.1 Position stand leg R (a) as shown in the illustration, then insert thestand lower stay (b) so the screw holes (c) match.2 Position stand leg L (d) as shown in the illustration, then insert the leftend of the stand lower stay.bacd