9 Adjusting the Printing 1-45ImportantNoteAdjusting Amount of Media FeedThe amount of feed is adjusted for each media type. Printing Pattern B setsthe amount of feed for the currently selected media type. Before printing,make sure that A3 or larger roll media is set. If you are using the W7250without the stand, make sure that A3 or larger cut sheet is set.z Before adjusting the amount of media feed, you must select the correct Roll MediaSetting in the operation panel for the roll media loaded in the printer. If the “RollMedia Type” selection is incorrect for the roll media set in the printer, this couldcause poor print quality.z Only Cut Sheet should be used with the W7250 without the stand. For details aboutloading cut sheets, see "Loading Cut Sheets" in Chapter 2 of the User's Guide. It ispossible to use both Roll Media and Cut Sheet with the W7200 and the W7250with the stand.z If you are using a cut sheet, make sure at least one sheet of unused A3 paper (notthe blank side of used paper) or larger is set.1 If the printer is off, press the Power button to switch the printer on.After a few seconds “Online” is displayed in the operation panel and theOnline lamp lights.2 Press the Online button twice to display “MAIN MENU”.