97CustomizationCustomized FunctionsYou can customize to your personal preferences many aspects of the operation of the camcorder, mostof them governing how the camcorder operates in mode. You can adjust up to 3 differentcustom function files and save them on the camcorder or to a memory card. By just reading the customfunction file saved on the memory card with another XH G1S / XH A1S, you will instantly get acamcorder configured to operate in the same familiar manner you prefer.Changing the Custom Function Settings1. Open the menu, select [CUSTOMIZE] and then select the [CUSTOM FUNCTION]submenu.The custom function editing screen appears.2. From the column on the left, select one of the 3 custom function files [C.Fn1] - [C.Fn3].• The overview display shows the current settings of the custom function file currently selected.• The cursor will move to the bottom bar of the custom function editing screen. To return one level backto the options on the column on the left, select [ RETURN] and press the SELECT/SET dial.3. From the bottom bar, select [ TUNE].The first function (00) of the custom function file will be highlighted in blue.4. Turn the SELECT/SET dial to select a function you want to adjust and press the dial.Make the selection as necessary and press the dial.Repeat this step to adjust all the functions you want to change.5. When you finish adjusting all the functions in the custom function file, select[ RETURN], press the dial and close the menu.Custom functions appear in one screen represented only by the function number on the top(numbers 00 - 20 with a black background), and the code of the current setting immediately under it.MENU( 27) CUSTOMIZE CUSTOM FUNCTION C.Fn1C.Fn2C.Fn3Back to the selection of customfunction files on the left side barSelected custom function file(highlighted in blue)Overview of the content ofthe custom function fileFunction number(black background)Code of the current settingoptionActivate the currently selectedcustom function fileChange the custom function settingsSave the custom function file to the memory card Read a custom function file from the memory cardReset the custom function file to defaultvalues
