Preparation31ETurning off the tally lampsThe tally lamps let you know that the camera isrecording. However, the flashing of the front lampmay be reflected into the lens during close-uprecording, or when recording through glass.You may therefore decide to turn them off.TALLY LAMP•• OFFSYSTEM1. Open the camera menu and select SYSTEM.2. Select TALLY LAMP, then select OFF setting.3. Close the menu.• The tally lamps no longer flash during recording, but they will still light up when the camera receivesa signal from the wireless controller.SENSOR•••••• OFFSYSTEMThe remote sensors can be turned off to prevent interference from other Canon wireless controllers beingused nearby.Turning off the remote sensors1. Open either the camera menu or the VCR menu, and select SYSTEM.2. Select SENSOR, then select OFF setting.3. Close the menu.• B appears in the viewfinder.(see p. 27)(see p. 27)
