105E PlaybackReturning to a Pre-marked PositionIf you wish to return to a particular scene later, mark the point with the zero set memory, and the tape willstop at that point when you rewind/fast forward the tape.This function is operated with the wireless controller.1. Press the ZERO SET MEMORY button at the point you wish to return to later.• The tape counter is reset to 0:00:00 and the mark appears.• To cancel, press the ZERO SET MEMORY button again.2. After you finish playing back the tape, rewind the tape.• “ RTN” appears.• The tape stops automatically at “0:00:00” and the mark disappears.• The tape counter changes to time code. The zero set memory may not function correctly if the time code has not been recordedconsecutively. The zero set memory function may not work correctly if you mix recordings in HDV and DVstandards on the same tape.REW buttonZERO SET MEMORYbuttonSTOP button
