16PreparationsPreparing the Power SupplyCharging the Battery PackDisconnect the DC coupler from the power adapter before charging. Remove the terminal cover of thebattery pack.1. Connect the power cord to the adapter.2. Plug the power cord into a power outlet.3. Attach the battery pack to the adapter.• Press lightly and slide the battery pack in thedirection of the arrow until it clicks.• The charge indicator starts flashing. The indicatorwill stay on when the charging is complete.4. When the charging is complete, remove thebattery pack from the adapter.5. Unplug the power cord from the poweroutlet and disconnect it from the adapter.Attaching the Battery Pack1. Turn the POWER dial to OFF.2. Attach the battery pack to the camcorder.Press lightly and slide the battery pack up, in thedirection of the arrow until it clicks.3. Remove the battery pack after use.Holding the BATT.RELEASE button pressed down,slide the battery pack down to remove it.Charge indicator
