55E Using the FullRange of Features1. Open the menu and select SYSTEM.2. Select D/TIME SET.• The year display starts to flash.3. Turn the selector dial up and down to change the year. Press thedial in to move to another part of the display.• Once you move from the year, the next part of the display starts flashing.4. Set the month, day, hours, and minutes in the same way.5. Press the MENU button when finished, and to start the clock.Notes:• To make a change to part of the date and time, press the selector dial in at step3 to move to the part to be changed. Turn the dial to make the change, thenclose the menu.• The date can be set to any year between 2002 and 2030.• If you press the MENU button in the middle of setting the date and time, youleave the menu, and the clock starts.• If you press the selector dial in after setting the minutes you can set the dateand time again from the start.Setting the clockD/TIME SET••JAN. 1,200212:00 AMSYSTEM( 40)Date and time displayYou can choose to display or hide the date and time display during recording.When the date and time display is set to ON, the date and time show in the lowerleft-hand corner of the display but the time zone disappears in about 4 seconds.The large, 4-second display will no longer appear when you turn on the power. Itis not automatically superimposed on your recordings.D/T DISPLAY•OFFDISP.SET UP( 40)To turn it on, open the menu and select DISP.SET UP. Then select D/TDISPLAY, set it to ON and close the menu.After you set the date and time, the date/time and home time zone will bedisplayed for about 4 seconds each time you turn the power on.+ , + CAMERACARDCAMERATAPE+ , + CAMERACARDCAMERATAPE
