86EUsing the FullRange of FeaturesReturning to a Pre-Marked PositionUse the wireless controller to mark a point on a tape that you want to return tofollowing playback.1. Press the ZERO SET MEMORY button on the wireless controllerduring playback at a point you want to return to later.• The time code is replaced by a tape counter that is set to zero with the Âindication.• Press the ZERO SET MEMORY button once more to cancel the zero setmemory.2. When you have finished playback, fast forward or rewind the tape.The tape stops automatically when it reaches the zero set position.• RTN1 or `RTN appears in the display.• The tape counter with  indication disappears from the display and the timecode reappears.Notes:• The zero set memory may not function correctly where there is a break betweenrecordings on the tape.• You can also use zero set memory to mark a position on a tape in TAPECAMERA mode. When you then play back the tape, pressing rewind will takeyou back to the pre-marked position.• If you remove the tape while the zero set memory is set, the memory iscanceled and the tape counter reverts to time code.• The camcorder remembers your setting even if you turn it off and back on againor move the program selector.REW PLAY FFSEARCHSELECTSTOPPAUSE SLOW ×2+ /– /REMOTE SETZERO SETMEMORYAUDIODUB.AVINSERTPOWERCAMERACAMERAPLAY(VCR)OFFOFF+ , + PLAY(VCR)TAPECAMERATAPE
