88Audio DubbingYou can add sound from audio devices (AUDIO IN) or with the built-in microphone(MIC. IN).This function is operated with the wireless controller.Connecting an Audio DeviceRefer also to the instruction manual of the connected device.Dubbing1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.Use a tape recorded in SP, 12-bit mode with this camcorder.2. Open the menu and select [AUDIO SETUP]. Select [AUDIO DUB.], set itto [AUDIO IN] or [MIC. IN] and close the menu.3. Locate the scene you wish to start audio dubbing.4. Press the PAUSE a button on the wireless controller.5. Press the AUDIO DUB. button on the wirelesscontroller.“AUDIO DUB.” and “ a” appear.6. Press the PAUSE a button on the wireless controllerto begin dubbing.• Audio device: Begin playback.• Microphone: Speak into the built-in microphone.CARD PLAYCARD CAMERAPLAY (VCR)CAMERAAVRL AUDIOOUTPUTSTV-250N Stereo Video Cable(supplied)Signal flowAUDIO DUB.•••AUDIO INAUDIO SETUP( 39)REWPAUSEAV INSERT AV DV REMOTE SETSLOW 2PLAYSTOPFFZERO SETMEMORY12bitAUDIO OUTAUDIO DUB.REWPAUSEAV INSERT AV DV REMOTE SETSLOW 2PLAYSTOPFFZERO SETMEMORY12bitAUDIO OUTAUDIO DUB.Audio device(e.g. CD player)
