91EditingEConnecting to a Computer Using a DV (IEEE1394) CableYou can transfer recordings to a computer equipped with a DV (IEEE1394) terminal orIEEE1394 capture board. Optional software is required for transferring recordingsfrom the tape to a computer. Refer to the instruction manual of the software.❍ Operation may not work correctly depending on the software and thespecifications/settings of your computer.❍ If the computer freezes while you have connected the camcorder, disconnectand reconnect the DV cable. If the problem persists, disconnect the interfacecable, turn off camcorder and computer, turn camcorder and computer backon and reconnect them.❍ Do not disconnect the DV cable, open the memory card cover,remove the memory card, change the position of the POWER switch or turn offthe camcorder and computer while data is being transferred to the computer(while the camcorder’s card access indicator is flashing). Doing so may damagethe memory card’s data.❍ The image files on your memory card and the image files savedon the hard disk drive of your computer are valuable, original data files. If youwish to use image files on your computer, make copies of them first, and usethe copied file, retaining the original.❍ We recommend powering the camcorder from a household power sourcewhile it is connected to the computer.❍ Refer also to the instruction manual of the computer.❍ Users of Windows XP can use the DV Network Softwarecontained on the DIGITAL VIDEO SOLUTION DISK For Windows. For details,refer to the DV Network Software Instruction Manual.DVIEEE1394 (DV) terminalCommercially available DV cableDV terminal6-pin4-pin
