Playback26Locating the End of the Last SceneAfter playing back a tape, use thisfunction to locate the end of the lastscene recorded in order to continuerecording from that point.POINTS TO CHECKStop the playback before using thisfunction.1 Press .2 Select ( ) [ END SEARCH] andpress ( ).3 Select ( ) [EXECUTE] and press( ).• “END SEARCH” appears.• The camcorder rewinds/fast forwardsthe tape, plays back the last fewseconds of the recording and stops thetape.• To cancel the search push thejoystick ( ) towards .NOTESEnd search cannot be used once you removethe cassette.If there are blank sections betweenrecordings, the end search may not workcorrectly.Magnifying the Playback ImageDuring playback, movies and still imagescan be magnified up to 5 times. You canalso select the area to be magnified.1 Move the zoom lever toward T.• The image is magnified by 2 timesand a frame appears indicating theposition of the magnified area.• To further enlarge the image, movethe zoom lever toward T. To reduce themagnification, move the zoom levertoward W.• will appear for images that cannotbe enlarged.2 Select ( , ) the enlarged areaof the picture with the joystick.To cancel the magnification, move thezoom lever toward W until the framedisappears.IMPORTANTWhile the magnification position frame isdisplayed, it will replace the joystick guide. Cancelthe magnification to return to normal playback.FUNC.( 19)FUNC.( 9)