Canon i900D Series Printing Manual

Also see for 900D - i Color Inkjet Printer: Setup instructions Printing guide Quick start guide Quick start guide Printing guide

Contents

44Photo Paper Tray is lowered.Turn the dial to use the sheetfeeder.• When paper feeding is set to be done from the Photo Paper Tray, paper cannot be fedfrom the Sheet Feeder.Turn the knob on the Photo Paper Tray to change the way to feed paper.• The size of paper loaded in the Photo Paper Tray may be different from the paper sizeselected on your digital camera or the operation panel of the printer.When printing from the digital camera, change the paper size setting of the digitalcamera to the size of paper loaded in the Photo Paper Tray.When using the digital camera that cannot select the paper size or when printing froma memory card, change the setting on the operation panel of the printer.Error code Turn off the printer, remove the power cord plug from the outlet, plug the power cordback in, and then turn on the printer again.If the same error persists, contact the Customer Care Center.Note Adjusting the Print Head ManuallyIf the automatic print head adjustment does not work or if you wish to adjustthe print heads manually, follow the procedure below.1. With the printer on, load a sheet of Letter plain paper in the printer.2. Press the MenuMenuMenuMenu button.3. Use the buttons to select MaintenanceMaintenanceMaintenanceMaintenance and then press the OKOKOKOKbutton.4. Use the buttons to select Manual head alignManual head alignManual head alignManual head align and then press the OKOKOKOKbutton.If the Same Error PersistsIf the same error persists after a countermeasure is taken according to theabove errors, turn off the printer, remove the power cord plug from the outlet,plug the power cord back in, and then turn on the printer again.Message Try This5. Use the buttons to select YesYesYesYes and then press theOKOKOKOK button.6. The message "Did the pattern print properly?" isdisplayed on the LCD.Use the buttons to select YesYesYesYes and then press theOKOKOKOK button.7. Examine the printed pattern and enter the number ofcolumn "A" with fewest white stripes using thebuttons.8. Press the OKOKOKOK button.9. Use the button and move the cursor to column "B".10.Repeat Steps (6) through (8) and enter the patternnumbers up to column "G".11.After entering the pattern numbers up to column "G",press the OKOKOKOK button.