462 Press the SaveSaveSaveSave button.The photos will be saved to a folder created in the location specified below.The folder will be named automatically according to the date that it was created(YYYY_MM_DD).Windows XP/Windows 2000/Windows Me: My PicturesMy PicturesMy PicturesMy Pictures folderWindows 98: My DocumentsMy DocumentsMy DocumentsMy Documents folderMac OS X v.10.2.1 or later: PicturesPicturesPicturesPictures folderSetting up the Card Slot as the Memory Card Drive ofthe ComputerThe card slot of the printer can also be used as the memory card drive of the computer.1 Ensure that the printer and the computer are turned on.2 Display the Read/write attributeRead/write attributeRead/write attributeRead/write attribute screen.(1) Ensure that no memory card is in the card slot. If a memory card is in the cardslot, remove it.(2) Press the MenuMenuMenuMenu button.(3) Use the buttons to select Maintenance/settingsMaintenance/settingsMaintenance/settingsMaintenance/settings and then press the OKOKOKOKbutton.You can save only the selected photos when you have selected photosusing the search function. For the information about the search function,see “Searching for Photos with the Shooting Date” on page 20. To use the card slot of the printer as the memory card drive of the computer,the printer must be connected to the computer and the Memory Card Utilitymust have been installed for Windows Me/Windows 98/Windows 98Second Edition. If the utility is not installed, install it followingthe installation procedure explained in theEasy Setup Instructions. When Read/write modeRead/write modeRead/write modeRead/write mode is selected, you cannot print photos in the memorycard.After you are finished with using the card slot as a memory card drive foryour computer, remove the memory card, then be sure to select Read-onlyRead-onlyRead-onlyRead-onlymodemodemodemode again.
