60 POWER Lamp and Alarm Lamp Flash AlternatelyAdjusting the Print Head ManuallyIf the automatic print head adjustment does not work or if you wish to adjustthe print heads manually, follow the procedure below.1. With the printer on, load a sheet of A4/Letter-sized plain paper inthe auto sheet feeder.2. Press the MenuMenuMenuMenu button.3. Use the buttons to select Maintenance/settingsMaintenance/settingsMaintenance/settingsMaintenance/settings and then pressthe OKOKOKOK button.4. Use the buttons to select MaintenanceMaintenanceMaintenanceMaintenance and then press the OKOKOKOKbutton.5. Use the buttons to select Manual head alignManual head alignManual head alignManual head align and then press the OKOKOKOKbutton.6. When the confirmation message is displayed, use the buttons toselect YesYesYesYes and then press the OKOKOKOK button.The print head alignment pattern will be printed.7. The message of “Did the patterns print correctly?Did the patterns print correctly?Did the patterns print correctly?Did the patterns print correctly?” is displayed onthe LCD.Ensure that the patterns were printed normally and use the buttonsto select YesYesYesYes and then press the OKOKOKOK button.Possible Cause Try ThisAn error that requires contacting theCustomer Care Center may have occurredDisconnect the printer cable from the printer, and then turn the printer off and unplugthe printer from the power supply. Plug the printer back in and turn the printer back onafter leaving it for a while.If the problem remains, contact the Customer Care Center.8. Examine the printed pattern and enter the number ofcolumn “A” with fewest white stripes using thebuttons.9. Use the button to move the cursor to column “B”and then enter the number of column “B” with fewestwhite stripes using the buttons.10. Repeat the same procedure and enter the patternnumbers up to column “N”.11. After entering the number of all columns, press the OKOKOKOKbutton.
