Canon iPF8400 Basic Manual

Also see for imagePROGRAF iPF8400: Troubleshooting guide Brochure & specs Setup guide User guide Service manual

Contents

Cause Corrective ActionIf this error recurs after you reload the roll,remove the Roll Holder from the printer,push the roll firmly in until it touches the RollHolder flange, and reload the Roll Holder inthe printer.(See "Attaching the Roll Holder to Rolls.")→ P.9Because the Platen is soiled with ink or other substances, the size of the clear filmcannot be detected.Open the Top Cover and clean the entirePlaten.(See "Cleaning Inside the Top Cover.")→ P.53Insufficient paper for jobInsufficient paper for jobCause Corrective ActionThe printer has received a print job longer than the amount of roll paper left when Man-ageRemainRoll in the Control Panel menu is On.Press ▲ or ▼ to select Print, and then pressthe OK button to resume printing.When using the Media Take-up Unit, press ▲or ▼ to select Print, and then press the OKbutton to resume printing.However, the roll paper may run out duringthe print job and you may not be able to printall of the document.Press ▲ or ▼ to select Change Paper, andthen press the OK button.Change the Paper Source of the printer driv-er, or replace the roll with a roll that hasenough paper for the print job, and then printt.When using the Media Take-up Unit, press ▲or ▼ to select Stop Printing, and then pressthe OK button to stop printing.Remove the printed document from the MediaTake-up Unit, replace the roll with a roll thathas enough paper for the print job, and thentry printing again.(See "Removing the Roll from the Printer.")→ P.15(See "Loading Rolls in the Printer.") → P.11(See "Removing Printed Documents from theMedia Take-up Unit (Optional).")→ User's GuidePress ▲ or ▼ to select Stop Printing orpress the Stop button to stop printing.This paper cannot be used as size is not supported.This paper cannot be used as size is not supported.Cause Corrective ActionPaper that is too large for the printer has been loa-ded.Lift the Release Lever and load paper of the correct size.(See "Paper Sizes.") → User's GuideiPF8400 Insufficient paper for jobBasic GuideError Message Messages regarding paper135