Canon iPF8400 Basic Manual

Also see for imagePROGRAF iPF8400: Troubleshooting guide Brochure & specs Setup guide User guide Service manual

Contents

Adjusting the feed amountAdjusting the feed amountSelecting a Feed Amount Adjustment Method ................................................................................................. 99Adjusting Line Length ................................................................................................................................................. 100Selecting a Feed Amount Adjustment MethodSelecting a Feed Amount Adjustment MethodThere are two methods of adjusting the paper feed amount, Print Quality and Print Length, either of which will beapplied during printing.Since the method that is applied during printing is determined from the value of the Adj. Priority setting, configurethe Adj. Priority to match the print target.• Print Quality : Adjusts the feed amount to reduce banding across the sheet in printed documents.Adj. Quality settings are applied. When Adj. Fine Feed is executed, the Adj. Fine Feed settings are appliedin addition to the Adj. Quality settings.• Print Length : Adjusts the feed amount for better accuracy of lines in printed documents.The settings of A:High or B:Standard/Draft in Adjust Length are applied.• Automatic: Print Quality or Print Length is selected, depending on Print Priority as selected in the printerdriver at the time of printing.Note• Either A:High or B:Standard/Draft in the Adjust Length menu is applied, depending on printer driver settings at thetime of printing.Follow these steps to configure the settings.1 Load the paper.• Attaching the Roll Holder to Rolls →P.9• Loading Rolls in the Printer →P.11• Loading Sheets in the Printer →P.182 On the Tab Selection screen of the Control Panel, press ◀ or▶ to select the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.3 Press the OK button.The Set./Adj. Menu is displayed.4 Press ▲ or ▼ to select Adjust Printer, and then press the OK button.5 Press ▲ or ▼ to select Feed Priority, and then press the OK button.6 Press ▲ or ▼ to select Adj. Priority, and then press the OK button.7 Press ▲ or ▼ to select Automatic, Print Quality, or Print Length, and then press the OK button.iPF8400 Selecting a Feed Amount Adjustment MethodBasic GuideAdjustments for Better Print Quality Adjusting the feed amount99