| 
Sending Methods3-2Sending Faxes3Sending MethodsSending MethodsThis section describes the various methods for sending faxes, and how to stampscanned and sent originals.NOTE• You can also fax the documents from your computer. If you want to install the software forfax sending, see Chapter 2, “Getting Started,” in the Fax Driver Guide.• For details on how to send faxes from your computer, see Chapter 3, “Fax DriverOptions,” in the Fax Driver Guide.• When you fax the documents from your computer, you will need to set to the DRIVER TX> in located in the .■ Memory SendingAll of the originals to be sent are first scanned and read into memory, then sent. Thismeans that you do not need to stay near the machine once the originals have beenscanned.■ Direct SendingThe machine sends each page of the document to the destination as it is scanned.IMPORTANT• You cannot use the Direct Sending with the platen glass. To use the Direct Sending, theoptional Feeder (DADF-P1) is necessary.• You can specify only one destination at a time for Direct Sending.• Memory Sending is automatically set when using Delayed Send or when multipledestinations are specified.• If an error occurs or you cancel transmission in the Direct Sending mode, you can checkhow many pages have been sent to the destination by printing the TX report. |
