Adjusting the Scan Settings3-8Sending Faxes3Adjusting the Scan SettingsAdjusting the Scan SettingsTo ensure that a received fax document is easy to read, set the resolution and scandensity to match the originals you are sending.NOTE• You can store the most frequently used resolution and scan density settings. (See“Changing the Fax Default Settings,” on p. 6-4.)• Although originals sent in the FINE, PHOTO, SUPER FINE, or ULTRA FINE modesenhance image clarity, transmission may take longer than if the originals are sent in theStandard mode.• The default settings are:- Image Quality: ‘STANDARD’- Density: ‘STANDARD’Image Quality (Resolution)You can specify the resolution before scanning the original. The following settingsare available for adjusting the resolution.• STANDARD: (200 × 100 dpi): This mode is best suited for scanning text originals.• FINE: (200 × 200 dpi): This mode is best suited for scanning for fine print originals.• PHOTO: (200 × 200 dpi): This mode is best suited for scanning photos.• SUPER FINE: (200 × 400 dpi): This mode is best suited for scanning originalscontaining both text and image/photos, such as magazines or catalogues.• ULTRA FINE: (400 × 400 dpi): This mode is best suited for scanning originalscontaining both text and image/photos, such as magazines or catalogues.
