Canon image Prograf iPF780 Series Setup Manual

Also see for image Prograf iPF785 Series: Basic guide User guide Service manual User guide

2PreparationsRemove the orange tape used to securethe roll holder to the printer.4Three people should hold the printer's carrying handles and place the printer on a table orother flat location.When moving the printer, firmly grasp thecarrying handles. Holding the printer atother positions is dangerous, and maycause injury and damage if the printer isdropped.•3 The iPF780 Series/iPF785 Series weighsapproximately 56 kg and the iPF680Series/iPF685 Series approximately 46 kgby themselves. Moving the printer requiresat least three people. Be careful to avoidback strain and other injuries.•CautionPlug the power cord into the power supplyconnector on the right of the printer andplug the other end into the outlet.Move the printer to the location where youwill use it. 65 When moving the stand, lift the support rodto the position (a) before closing the outputstacker and unlocking the 4 casters. Failureto do so may lead to scratched flooring,damage to the basket cloth, and injury.• After you have moved the stand, be sure tolock the 4 casters.•CautionONOFFaPrepare the printer for use by installing the printer and connecting the power cord.Remove the packing materials from thetop of the printer.2Install the printer. You can use thefollowing two methods for installing theprinter.• Install with a standAssemble the stand and install theprinter referring to the Printer StandSetup Guide included with the stand.After installation, proceed to step 4.• Install without a stand on a tableProceed to step 2.1 Stands may be standard or optionaldepending upon your model and location.iPF780 Series/iPF785 Series: StandardiPF680 Series/iPF685 Series: Optional(equipped as standard in some locations)•MEMO