Canon Image Prograf PRO-2000 Setup Manual
              |
1QT6-2133-V01 PRINTED IN XXXXXXXXXXXXXXXX © CANON INC. 2017479It is recommended that you reserve space of the following dimensions to allow you to work around the printer.Check the completed image of the printer you purchased and make sure you have enough space to install the printer.In order to ensure that this product is used safely, be sure to read the precautions.-> Quick Guide (separate manual)Before Setting Up the PrinterRead this manual before attempting to operate the printer.Keep this manual in a handy location for future reference.Set up the printer using the following procedure.• Windows is a trademark or registered trademark of Microsoft Corporation in theU.S. and/or other countries.PRO-2000Installation space (W x D x H)• When not using the stand59.5 x 56.5 x 40.2 inches (1510 x 1434 x 1020 mm)• When using the stand59.5 x 66.3 x 61.5 inches (1510 x 1684 x 1560 mm)PRO-4000 / PRO-4000SInstallation space (W x D x H)78.5 x 66.3 x 61.5 inches (1993 x 1684 x 1560 mm)PRO-6000 / PRO-6000SInstallation space (W x D x H)94.5 x 66.3 x 61.5 inches (2399 x 1684 x 1560 mm)Confirming the Installation SpaceOverview of SetupImportant• The printer stand and roll unit may be options depending on the model. Care is required because the required space may differ depending on whether or not theoptions are used.• The space required in front of the printer differs on how the basket supplied with the printer stand is used. This shows the installation space when used in theposition in the illustration.Caution• Instructions in this Setup Guide show the PRO-4000 printer. Note that your printer may look different from these illustrations in some cases. However, the basicoperations are the same.Note• Some items are included with the printer but not described inthis manual.Keep these items in a safe place after setup because theyare used in various printing applications.• For instructions on the included items not described in thismanual, refer to the Online Manual. ("How to Display theOnline Manuals" on p.14)• A cable to connect the printer to a computer is not providedwith the printer.RMC (Regulatory Model Code): K10468RMC (Regulatory Model Code): K10441RMC (Regulatory Model Code): K10440RMC (Regulatory Model Code): K10439RMC (Regulatory Model Code): K10438If an error message appears during setup or other problems occur,refer to "Responding to Messages" on p.14.Setup GuideIntroductory InformationENGLISH• Check this also after setup is complete.3.9 inches(100 mm)(When not usingthe stand)3.9 inches (100 mm)(When using thestand)23.6 inches(600 mm)(When using the stand)(When notusing the stand)5.9 inches (150 mm)7.9 inches(200 mm)7.9 inches(200 mm)23.6 inches(600 mm) 7.9 inches(200 mm)7.9 inches(200 mm)23.6 inches(600 mm)3.9 inches(100 mm)5.9 inches(150 mm)7.9 inches(200 mm)7.9 inches(200 mm)23.6 inches(600 mm)3.9 inches(100 mm)5.9 inches(150 mm)* Assemble the Stand (P.3) * Refer to the separatemanualInstall the Printer (P.3)* Attach the Roll Unit (P.4) * Refer to the separatemanual* Attach the Basket (P.4) * Refer to the separatemanualTurn On the Printer (P.4)Install the Ink Tanks (P.6)Install the Print Head (P.8)Load the Paper (P.9)Store Accessories in the Pockets (P.13)How to Display the Online Manuals (P.14)• Perform Print Head Adjustment (P.10 ~ 12)• Connect to the Printer |
Related manuals for Canon Image Prograf PRO-2000
Canon ImagePrograf PRO-6100 Setup Manual
Canon imagePROGRAF SD-22 Setup Manual
Canon imagePROGRAF SD-21 Setup Manual
Canon imagePROGRAF TZ-30000 Setup Manual
Canon imagePROGRAF PRO-2000 Online Manual
Canon image Prograf iPF780 Series Setup Manual
Canon imagePROGRAF iPF8400 Setup Manual
Canon imagePROGRAF iPF8300 Setup Manual
Canon imagePROGRAF W2200S Setup Manual
Canon imagePROGRAF GP-300 Setup Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine