Copying4-16Multiple Documents onto One Sheet (2 on 1)2 Press [COPY].3 Press [Collate/2 on 1] repeatedlyto select <2 ON 1>, then press [OK].2 O N 1C O L L A T E / 2 O N 1If you want to use <2 ON 1> and “CollatingCopies” (see p. 4-13) at the same time, select, then press [OK].If you want to use <2 ON 1> and the 2-sidedcopying at the same time, go to step 3 of “1 to2-Sided Copying” (see p. 4-19), “2 to 2-SidedCopying” (see p. 4-20), or “2 to 1-SidedCopying” (see p. 4-21).4 Use – [numeric keys] to enter thedesired copy quantity (1 to 99).T E X T / P H O T O 16 3 % * L T R5 Press [Start].If you want to copy multiple documents usingthe platen glass, place a document and press[Start] once for each page. When scanningis complete, press [OK].To cancel all settings, press [Stop/Reset].A maximum of 1/8" (4 mm) margin will beproduced between the two reduceddocuments in 2 on 1 copying.–––––Copying ID CardYou can make copies of a card printed on both sideslike an ID card. The printed images on the front-back both sides of a paper are placed on exactly thesame position like the original card.You must place a document on the platen glass when usingthis function.The zoom ratio will automatically be set to <100%> with thisfeature. You cannot change the copy size.The paper size you can use is LTR or A4. If you select otherpaper size in the paper size setting, the ID card copy functionwill be canceled automatically.When you select the ID card copy, the other copy settings youmade, such as the copy ratio and paper size, will be canceledautomatically.This function cannot be used with the 2 on 1 mode, thecollating mode, or the 2-sided copying mode.1 Place a card on the platen glass.Place a card as indicated below.Ex.Align the center of a card with the arrowmark.2 Press [COPY].3 Press [Collate/2 on 1] repeatedlyto select , then press[OK].I D C A R D C O P YC O L L A T E / 2 O N 1–––––––
