Adjustment at Parts ReplacementMain Controller PCBActions before Replacement1. Execute the following service mode to output the spec report, and write down the serial number.• COPIER > FUNCTION > MISC-P > OUTPUT > SPEC2. Print out the following User Data List.• [Home] > [Menu] > [Output Reports] > [User Data List]3. Write down the contents of service mode on a sheet of paper.CAUTION:This machine does not have functions to print out, backup and restore service mode.When replacing the Main Controller PCB, write down data of service mode on a sheet of paper. After replacing with a newMain Controller PCB, enter data.Actions after Replacement1. Enter the serial number (8 alpha-numerals), as identified before the replacement, into the following field in LUI.• [Home] > [Menu] > [System Management Settings] > [Device Information Settigs] > [Location]2. Enter the serial number in the following service mode.• COPIER > OPTION > SERIAL > SN-MAIN3. Turn OFF/ON the main power.4. Set the Location from the following service mode.[Setting Value]JAPAN, USA, KOREA, CHINA, TAIWAN, EUROPE, ASIA• COPIER > OPTION > BODY > LOCALE5. Clear all data in the following service mode.• COPIER > FUNCTION > CLEAR > ALL6. Turn OFF/ON the main power.7. Print out the Spec Report by the following service mode and check the serial number and Location.• COPIER > FUNCTION > MISC-P > OUTPUT > SPEC8. Enter to the following locations based on the User Data List that was printed out before replacing the Main Controller PCB.• [Home] > [Menu] > [Network Settings]• [Home] > [Menu] > [Preferences]• [Home] > [Menu] > [Timer Settings]• [Home] > [Menu] > [Common Settings]• [Home] > [Menu] > [Copy Settings]• [Home] > [Menu] > [Scan Settings]• [Home] > [Menu] > [Printer Settings]• [Home] > [Menu] > [Adjustment / Maintenance]• [Home] > [Menu] > [System Management Settings]9. Enter data of service mode from before replacing the Main Controller PCB.Control Panel Unit Touch Panel ModelActions after ReplacementExecute the following service mode to adjust the Touch Panel.• COPIER > ADJUST > PANEL > TOUCHCHK5. Adjustment221
