Canon imageCLASS MF3240 Series Advanced Manual

Also see for ImageCLASS MF3240 Series: Basic guide Basic guide Starter Guide Software guide

123456TOPBack Previous Next5-16Table of ContentsIndexAdvanced FaxFeaturesAdvanced CopyFeaturesSystem MonitorReports and ListsTroubleshootingAppendixTelephone ProblemsCannot dial.Q Is the telephone cable connected properly?A Make sure the cable is connected properly. (See“Connect Telephone Cables,” in the Starter Guide.)Q Is the power cord plugged in securely?A Check that the power cord is securely plugged intothe machine and into the wall outlet. If the machineis plugged into a power strip, make sure the powerstrip is plugged in and turned on.Q Is the machine set for the correct telephone linetype?A Make sure the machine is set for the correcttelephone line type. (See “Set the Telephone LineType,” in the Starter Guide.)Telephone disconnects while you are talking.Q Is the telephone cable connected properly?A Make sure the cable is connected properly. (See“Connect Telephone Cables,” in the Starter Guide.)Q Is the power cord plugged in securely?A Check that the power cord is securely plugged intothe machine and into the wall outlet. If the machineis plugged into a power strip, make sure the powerstrip is plugged in and turned on.Q Is the telephone cable defective?A Use another cable.Calls do not connect, or the wrong number is dialed.Q Did you confirm the dial tone before enteringthe fax number?A Make sure to confirm the dial tone before enteringa fax number. If you enter the number before thedial tone can be heard, the call may not beconnected, or the wrong number may be dialed.