Canon imageCLASS MF4100 Series Starter Manual

Also see for imageCLASS MF4100 Series: Basic guide Service manual Starter Guide

Contents

Set the Machine for Receiving Faxes (MF4140/MF4150 Only)Select the Receive Mode that Suits Your NeedsFollow the chart below to determine the correct receive mode for your needs.NOTE– The answering machine must be connected directly to the machine for to work. (See “Connect TelephoneCables,” on p.9.)– The external telephone must be connected to the machine for or to work. (See “Connect TelephoneCables,” on p.9.)– Voice mail is not supported with .– The mode is available for certain countries only and requires subscription to a network switch service.Contact your telephone company for availability.Do you intend to use the machine toreceive voice calls? No Answers all calls as faxes.Do you intend to use an answeringmachine with the machine? Yes Receives faxes automaticallyand records voice messages.Do you intend to receive faxesautomatically?No Does not answer any calls.You have to manually receivefaxes.Switches between fax andvoice calls automatically if anexternal telephone isconnected to the machine.YesNoYesDo you subscribe to a NET SWITCHservice?NoYesDistinguishes between fax andvoice calls.Set the Receive Mode1 Press [AdditionalFunctions].2 Use [ ] or [ ] toselect <5 FAX SETTINGS>,then press [OK].3 Use [ ] or [ ] toselect <3 RX SETTINGS>,then press [OK].4 Use [ ] or [ ] toselect <3 RX MODE>,then press [OK].5 Use [ ] or [ ] toselect the receive mode,then press [OK].NOTE– For , make surean answering machine isconnected to the machine.– If or is selected, you can selectsome settings as below:– – – – – 6 Press [Stop/Reset] toreturn to the standbymode.NOTEFor details, see Chapter 1,“Setting the Receive Mode” inthe Advanced Guide.19 20