Canon imageCLASS MF4580dn Starter Manual

Contents

17• If excessive stress is applied to the connection part of the power cord, it maydamage the power cord or the wires inside the machine may disconnect. Thiscould result in a fire. Avoid the following situations:- Connecting and disconnecting the power cord frequently.- Tripping over the power cord.- The power cord is bent near the connection part, and continuous stress isbeing applied to the power outlet or the connection part.- Applying a shock to the power connector.• Do not use power cords other than the one provided, as this can result in a fire orelectrical shock.• As a general rule, do not use extension cords. Using an extension cord may resultin a fire or electrical shock.• Remove the power plug from the AC power outlet and refrain from using themachine during a thunder storm. Lightning can result in a fire, electrical shock ormalfunction.CAUTION• Do not use a power supply voltage other than that listed herein, as this may resultin a fire or electrical shock.• Always grasp the power plug when unplugging the power plug. Do not pull onthe power cord, as this may expose the core wire of the power cord or damagethe cord insulation, causing electricity to leak, resulting in a fire or electrical shock.• Leave sufficient space around the power plug so that it can be unplugged easily.If objects are placed around the power plug, you may be unable to unplug it in anemergency.HandlingWARNING• Do not disassemble or modify the machine. There are high-temperature and high-voltage components inside the machine which may result in a fire or electricalshock.• Electrical equipment can be hazardous if not used properly. Do not allow childrento touch the power cord, cables, internal gears, or electrical parts.• If the machine makes an unusual noise or emits smoke, heat, or an unusualsmell, immediately turn off the power switches of the machine and computerand disconnect the interface cable if it is connected. Then, unplug the powerplug from the AC power outlet and contact your local authorized Canon dealer.Continued use can result in a fire or electrical shock.• Do not use flammable sprays near the machine. If flammable substances comeinto contact with electrical parts inside the machine, this may result in a fire orelectrical shock.• Always turn off the power switches of the machine and computer, and thenunplug the power plug and interface cables before moving the machine. Failureto do so can damage the cables or cords, resulting in a fire or electrical shock.• Confirm that the power plug or power connector is inserted completely aftermoving the machine. Failure to do so can result in an overheating and fire.• Do not drop paper clips, staples, or other metal objects inside the machine. Also,do not spill water, liquids, or other flammable substances (alcohol, benzene,paint thinner, etc.) inside the machine. If these items come into contact with ahigh-voltage area inside the machine, this may result in a fire or electrical shock.If these items are dropped or spilled inside the machine, immediately turn off thepower switches of the machine and computer and disconnect the interface cableif it is connected. Then, unplug the power plug from the AC power outlet andcontact your local authorized Canon dealer.• When plugging or unplugging a USB cable when the power plug is plugged intoan AC power outlet, do not touch the metal part of the connector, as this canresult in electrical shock.CAUTION• Do not place heavy objects on the machine. The object or the machine may fall,resulting in personal injury.• Turn off the power switch when the machine will not be used for a long period oftime, such as overnight. Turn off the machine and unplug the power plug if themachine will not be used for an extended period of time, such as for several days.• Open or close covers and install or remove cassettes gently and carefully. Becareful not to hurt your fingers.• Keep your hands and clothing away from the roller in the output area. Even if themachine is not printing, the roller may suddenly rotate and catch your hands orclothing, resulting in personal injury.• The output slot is hot during and immediately after printing. Do not touch thearea surrounding the output slot, as this may result in burns.• Printed paper may be hot immediately after being output. Be careful whenremoving the paper and aligning the removed paper, especially after continuousprinting. Failure to do so may result in burns.• When performing copy with a thick book placed on the platen glass, do not pressthe feeder or the platen glass cover forcefully. This may damage the platen glassand cause personal injury.• Be careful not to drop a heavy object, such as a dictionary, on the platen glass.This may damage the platen glass and cause personal injury.• Close the feeder or the platen glass cover gently so as not to catch your hand. Thismay result in personal injury.• The laser beam can be harmful to the human body. The laser beam is confined inthe laser scanner unit by a cover, so there is no danger of the laser beam escapingduring normal machine operation. Read the following remarks and instructionsfor safety.- Never open covers other than those indicated in this manual.- Do not remove the caution label attached to the cover of the laser scannerunit.- If the laser beam should escape and enter your eyes, exposure may causedamage to your eyes.Maintenance and InspectionsWARNING• When cleaning the machine, turn off the machine and computer, and unplug theinterface cables and power plug. Failure to do so can result in a fire or electricalshock.• Unplug the power plug from the AC power outlet periodically and clean the areaaround the base of the power plug’s metal pins and the AC power outlet with adry cloth to remove all dust and grime. In damp, dusty, or smoky locations, dustcan build up around the power plug and become damp, which can cause a shortcircuit, resulting in a fire.• Clean the machine with a well wrung out cloth dampened with water or milddetergent diluted with water. Do not use alcohol, benzene, paint thinner, or otherflammable substances. If flammable substances come into contact with electricalparts inside the machine, this may result in a fire or electrical shock.• Some areas inside the machine are subject to high voltage. When removingjammed paper or when inspecting inside of the machine, be careful not to allownecklaces, bracelets, or other metal objects to touch the inside of the machine, asthis can result in burns or electrical shock.• Do not dispose of used toner cartridges in open flames. This may cause the tonerremaining inside the cartridges to ignite, resulting in burns or fire.• Confirm that the power plug or power connector is inserted completely aftercleaning the machine. Failure to do so can result in an overheating and fire.• Check the power cord and plug regularly. The following conditions may result infire, so please contact your local authorized Canon dealer or the Canon help line.- There are burn marks on the power plug.- The blade on the power plug is deformed or broken.- The power is turned OFF or ON when bending the power cord.- The coating of the power cord is damaged, cracked, or dented.- A part of the power cord becomes hot.• Check regularly that the power cord and plug are not handled in the followingmanner. Failure to do so can result in a fire or electrical shock.- The power connector is loosened.- Stress is being applied to the power cord by a heavy object or by fixing it withstaples.- The power plug is loosened.- The power cord is tied in a bundle.- A part of the power cord is put in an aisle.- The power cord is put in front of the heating appliance.