Canon imageCLASS MF5770 Remote Ui Manual

Also see for ImageCLASS MF5730: Basic guide Technical information Parts catalog User manual Basic guide

Preparation for Protocol Settings 2-7Specifying the Network Settings23 Execute the applicable command below to set the IP address forthe network board.ping -l 479Input Example: ping 172.20.88.125 -l 479NOTE• The character “-l” is the alphabet letter “L.”• The Subnet Mask and Gateway Address are set as <0.0.0.0>.The preparation for the machine’s protocol settings is complete.Settings Using NetSpot Device InstallerThe following is the procedure for specifying the settings using NetSpot DeviceInstaller.1 Insert the CD-ROM supplied with the printer into the CD-ROMdrive.2 Double-click the [My Computer] icon on the screen ➞ right-clickthe CD-ROM drive icon ➞ click [Open] on the pop-up menu.3 In the [NetSpot_Device_Installer] folder on the CD-ROM, run[nsdi.exe].4 From the list, select the device whose [Device Name] is the MACaddress of the printer with displayed in [Status].