Canon imageCLASS MF5950dw Settings Manual

Also see for imageCLASS MF5950dw: Service manual Product specifications Starter Guide Basic operation guide

Contents

1-4Setting the wireless LAN2. Press [ ] (Menu).1. Make sure the procedure “Step2 Switching theConnection Method to Wireless LAN” (P.1-2) iscompleted.3. Press [ ] or [ ] to select, and press [OK].The next screen is displayed for approximately5 seconds.You do not need to turn the machine OFF andON at this stage.6. Press [ ] or [ ] to select, and press [OK].7. Press [ ] to select, and press [OK].8. Within 2 minutes, press and hold the WPS button onthe wireless LAN router or access point.Wireless LAN SettingsWPS Push Button ModeWPS PIN Code ModeSSID SettingsWireless LAN Informa...Do you want toconnect with newsettings?NoYesSearching...Press the access pointWPS button for about5 seconds.Cancel: Press StopConnecting...Cancel: Press StopMenuNetwork SettingsPreferencesTimer SettingsCommon SettingsChanges effectiveafter main power isturned OFF and ON.4. Press [ ] or [ ] to select, and press [OK].Network SettingsSelect Wired/Wirele...Wireless LAN SettingTCP/IP SettingsSNMP Settings5. Press [OK].See Wireless LANSetting Guide toperform settings.OKFollow this procedure only if you selected “ Step4-A Setting the Machine Using the WPS (Push Button Mode)” on theprevious page.Step4-A Setting the Machine Using the WPS (Push Button Mode)If “Cannot find access point” is displayed.Press [OK] to close the screen and resume fromStep 6.* The amount of time you must hold down the WPS buttonwill depend on the model you are using.Please refer to the instruction manual for your wireless LANrouters and/or access points.