Canon imageCLASS MF6500 Series Starter Manual

Also see for imageCLASS MF6500 Series: Basic guide Driver guide Advanced guide Software guide Basic guide

Contents

17When you install PageManagerand OmniPage, follow the on-screen instructions.13 14 15Connect the machine and yourcomputer with a USB cable (A).16You have now completedinstallation.For Network Connection (MF6580 Only) Specify the IP AddressManuallyNOTE– This machine is set by default toautomatically draw an IP addressusing DHCP. If your network serveror router is configured to provide aDHCP address, all you need to dois connect a network cable andturn on the machine. The machinewill draw an IP addressautomatically.– This machine also supportsautomatic IP addresses usingBOOTP and RARP protocols. Fordefinitions and an explanation ofeach, please refer to the AdvancedGuide.1 Press [AdditionalFunctions].2 Use [ ] or [ ] toselect <9. SYSTEMSETTINGS>, then press[OK].3 Use [ ] or [ ] toselect <2. NETWORKSETTINGS>, then press[OK].4 Confirm that <1. TCP/IPSETTINGS> is displayed,then press [OK].5 Confirm that <1. IPADDRESS AUTO.> isdisplayed, then press[OK].6 Use [ ] or [ ] toselect , then press[OK].7 Confirm that <2. IPADDRESS> is displayed,then press [OK].8 Use the numeric keys toenter the IP addressnumber, then press [OK].9 Confirm that <3. SUBNETMASK> is displayed, thenpress [OK].10 Use the numeric keysto enter the subnetmask number, thenpress [OK].AEx.I P A D D R E S S0 0 0 . 0 0 0 . 0 0 0 . 0 0 0Ex.S U B N E T M A S K0 0 0 . 0 0 0 . 0 0 0 . 0 0 018